Lehrinhalte
This lecture series is given by various lecturers from science and industry.
The following topics are planned:
- Introduction (Prof. Dörsam, IDD)
- Overview Technologies (Prof. Dörsam, IDD)
- Workflow (Prof. Anderl, DiK)
- Design Rules (Prof. Kirchner, PMD)
- Materials (Prof. Oechsner, IfW-MPA)
- Component strength (Wagner, Fraunhofer LBF)
- Lightweight structures (Prof. Mittelstedt, KLUB)
- Selective Laser Sintering/Melting SLS/SLM (Prof. Abele, PTW)
- Selective laser melting: lasers, mechanisms, models (Prof. Albe, materials science)
- Extrusion process FDM/FLM (Nienhaus, Prof. Dörsam)
- Multi Color Printing (Prof. Urban, Fraunhofer IGD)
- Photopolymerization (Prof. Dörsam)
- 3D Printing in Medicine (Goetze, Universitätsmedizin Mainz)
- Guest lecture from industry
The formnext trade fair takes place in mid-November in Frankfurt: https://www.mesago.de/de/formnext/home.htm A (independently organised) visit is highly recommended for students. Admission is free of charge if you register online in good time.
An excursion (with a limited number of participants; registration necessary) to a company in the area of additive production is planned for the middle of December. We will submit a QSL application to finance travel costs. The registration formalities will be announced in due time during the lecture.
In May (in the following summer semester) the Conference on 3D-Printing in Medicine will take place in Mainz: http://www.3dprint-congress.com/ We will submit a QSL application for 10 students to finance the conference costs. You will be informed in good time about the registration and participation conditions via TUCaN.
Documents accompanying the lectures are provided on moodle. The purchase of a book is not necessary. For further information on the organisation of the lecture, the examination procedure or the excursion, please contact Prof. Dörsam.
[b]Examination[/b]
The examination takes place in writing, duration 60 min. The examination is offered every semester. Timely registration in TUCaN is required. The examination dates are (subject to availability of examination rooms) expected to be mid-March and mid-August. The exact examination dates will be announced in the first lecture by Prof. Dörsam. Exam contents include general questions on the topics covered in the lectures, multiple choice questions, cost accounting and sketches of 3D technologies. No documents or electronic devices (smartphone, calculator,...) may be used. The questions are based on the documents provided by moodle. Questions come to the guest lecture from industry and to the lecture from medicine even if there are no documents on moodle.
[b]Target audience[/b]
The lecture is aimed at students in the Bachelor's programme of the Faculty of Mechanical Engineering. Students from other faculties can participate, provided that the examination regulations provide for this possibility.
Erwartete Teilnehmerzahl
150
Online-Angebote
Moodle
This lecture series is given by various lecturers from science and industry.
The following topics are planned:
- Introduction (Prof. Dörsam, IDD)
- Overview Technologies (Prof. Dörsam, IDD)
- Workflow (Prof. Anderl, DiK)
- Design Rules (Prof. Kirchner, PMD)
- Materials (Prof. Oechsner, IfW-MPA)
- Component strength (Wagner, Fraunhofer LBF)
- Lightweight structures (Prof. Mittelstedt, KLUB)
- Selective Laser Sintering/Melting SLS/SLM (Prof. Abele, PTW)
- Selective laser melting: lasers, mechanisms, models (Prof. Albe, materials science)
- Extrusion process FDM/FLM (Nienhaus, Prof. Dörsam)
- Multi Color Printing (Prof. Urban, Fraunhofer IGD)
- Photopolymerization (Prof. Dörsam)
- 3D Printing in Medicine (Goetze, Universitätsmedizin Mainz)
- Guest lecture from industry
The formnext trade fair takes place in mid-November in Frankfurt: https://www.mesago.de/de/formnext/home.htm A (independently organised) visit is highly recommended for students. Admission is free of charge if you register online in good time.
An excursion (with a limited number of participants; registration necessary) to a company in the area of additive production is planned for the middle of December. We will submit a QSL application to finance travel costs. The registration formalities will be announced in due time during the lecture.
In May (in the following summer semester) the Conference on 3D-Printing in Medicine will take place in Mainz: http://www.3dprint-congress.com/ We will submit a QSL application for 10 students to finance the conference costs. You will be informed in good time about the registration and participation conditions via TUCaN.
Documents accompanying the lectures are provided on moodle. The purchase of a book is not necessary. For further information on the organisation of the lecture, the examination procedure or the excursion, please contact Prof. Dörsam.
[b]Examination[/b]
The examination takes place in writing, duration 60 min. The examination is offered every semester. Timely registration in TUCaN is required. The examination dates are (subject to availability of examination rooms) expected to be mid-March and mid-August. The exact examination dates will be announced in the first lecture by Prof. Dörsam. Exam contents include general questions on the topics covered in the lectures, multiple choice questions, cost accounting and sketches of 3D technologies. No documents or electronic devices (smartphone, calculator,...) may be used. The questions are based on the documents provided by moodle. Questions come to the guest lecture from industry and to the lecture from medicine even if there are no documents on moodle.
[b]Target audience[/b]
The lecture is aimed at students in the Bachelor's programme of the Faculty of Mechanical Engineering. Students from other faculties can participate, provided that the examination regulations provide for this possibility.
Erwartete Teilnehmerzahl
150
Online-Angebote
Moodle
- Lehrende: Cordula Czwick
- Lehrende: Edgar Dörsam
- Lehrende: Holger Hermann Merschroth
- Lehrende: Anna Moritz-Fritschen
- Lehrende: Matthias Oechsner
- Lehrende: Gelöschter User (TU-ID gelöscht)
Semester: WT 2020/21